Package included
1 x pijplasmachine
3 x laskoppen (20 mm 25 mm 32 mm)
2 x Tighten screw
1 x key
1 x Support Shelf
1 x Iron Box
specifications
1. Name: Electric Welding Tool
2. Model: E06307
3. Color: green
4. Material: Iron Alloy
5. Ambient temperature: -20 ~ 50
6. Relative humidity: 45% to 95%
7. Spanningsbereik: AC 176V ~ 245V 50 ± 1Hz
8. Heating head temperature: 260 ± 5
9. Safety indicators: insulation resistance of not less than 1MΩ
10. Leakage current: ≤5mA (AC rms)
11. Size: 33x12cm
12. Doosmaat: 36x15cm
Characteristics
– For welding plastic pipes such as PP/PPR/PB/PE/PP-C pipes and etc.
– Designed for extended use.
– Non-slip handle, comfortable to grip.
– Suitable for pipeline construction equipment.
– Manganese steel panel, fast heat conduction.
– Thick gold paint touch head, hot melt fast heating.
Instruction
1. Install the heat sink on the fixed welding machine, put the welding machine on the rack, install the corresponding heating die according to the required pipe specifications, and use the wrench to tighten, usually small in the front to the back.
2. Power on: power on (note the power must be with a ground protection line), the green indicator light, until the green light is off, the red light is on, indicating that the fuse is in automatic temperature control, you can control the operation start. Note: In the automatic status of the temperature control, red light and green light will alternately illuminate, indicating that the fuse is in a controlled state and will not affect the operation.
3. Welded pipe: pipe cutter with a straight cut of the pipe, the pipe and pipe at the same time without rotating in the lon die, and in accordance with the requirements of the table to work, until the heating time immediately after the pipe and pipe at the same time of the mold removed, quickly and without rotation directly into the required uniform depth, so that the joints open in uniform flange
