Garage Door Remote 433.92 MHz For Chamberlain Liftmaster Motorlift 94335E 8433XE
Specification:
Model number: 826212
Product name: Garage Door Remote
Condition: New
Material: metal,plastic
Color: Black
Button: 4
Frequency: 433.92MHz
Codes: Rolling code technology
Battery: 3V CR2032 (Include )
Distance: Up to 100 meters
Dimension: 60.8×30.6x12mm
Fitment:
New Rolling Code Compatible Remote control fully compatible with Chamberlain Liftmaster Motorlift 94335e& 84335e type rolling code remote control system
This Remote is not compatible with 4335e, 4330e and 4333e remotes (these are without an 8 or 9 ) !!!
Suits a variety of garage door openers manufactured by; Chamberlain Liftmaster, Garador Autodor, Catnic Autodor, Wickes, Motorlift and Screwfix.
Compatible with follow CHAMBERLAIN LIFTMASTER MOTORLIFT REMOTE CONTROLS:
84330E, 94334CE, 94333E, 94334E, 94335E, 9747E,1A5639-7, 1A5477, 1A6487, 132B2372, D-66793, WICKES156105, 84333E, 84335E, 8747E, 84330EML, 84333EML, 84335EML, 8747EML, 94330E, 94330EWK, 94330EML, 94333EML, 94335EML,94334HD,
Compatible with follow gate openers:
MotorLift (ML500) (produced after 10.2006),
MotorLift 700 (ML700),
MotorLift 750 (ML750),
MotorLift 850 (ML850),
HC280
HC100ML (produced after 10.2006),
MotorLift HC300ML (produced after 10.2006),
MotorLift HC400ML (produced after 10.2006),
MotorLift HC500ML (produced after 10.2006),
MotorLift HC600ML (produced after 10.2006),
Power Drive GPD60, GPD65, GPD 80, TPD10, TPD500
Compatible with follow GRIFCO REMOTE CONTROLS:
GC844, CG844
Compatible with follow MERLIN + REMOTE CONTROLS:
C840, C940, C943, C945, CM842, CM844, CM128
Compatible with follow MERLIN + GATE OPENERS:
HE60, MGA600, MGL300, MGL400, MGS500, MGS500T, MGS000, MGS 1000T, MJ3800, MJ3800R, ML500, ML700, MLR70, MLR850, MR60, MR60, MR600A, MR650, MR800, MR800A, MR850, MR1000, MT60, MT60P, MT230, MT600, MT800, MT1000, MT3850, MT5580, MT5580P
Compatible only with 433mhz Rolling Code receivers !!!
These are prefix 8 or 9 ie: – 94330E & 94333E or 84330 & 84333E hand transmitters !!!
How to program this replacement remote control:
1) Press the programming button on your motor. The LED will go on.
2) Press desired button on the new remote control.
3) The opener light will flash, confirming successful programming. Now the opener will operate when the remote control push button is pressed.
To erase all codes from the receiver, hold the receiver’s Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased.
Package Included:
1 x Garage Door Remote
,,,
