mini 3.5mm wireless hifi stereo a2dp bluetooth audio receiver adapter

Mini 3.5mm Wireless HiFi Stereo A2DP Bluetooth Music Audio Receiver Adapter

Features : 

Specification :

How to enter pairing mode :

1. Enter pairing mode:Ensure the receiver is turned off, otherwise turn it off first and then press and hold MFB button for 6–7 seconds until LED flashes red and blue alternately,LED flashes red and blue alternately Two “DU” tones
2. Remark: The pairing mode will last 2 minutes, the receiver LOTFANCY will switch to standby mode automatically if no devices can be connected within 2 minutes.
3. Pairing with Bluetooth mobile phone
4. Ensure your mobile phone supports A2DP profile. The pairing procedures will vary depending on different models of mobile phones. Please refer to your mobile phone user’s manual for further information. The general pairing procedures are as follows:
1) Place the receiver and Bluetooth mobile phone where they are easily viewable by no more than 1 meter apart;
2) Enter the receiver’s pairing mode (please refer to “How to enter pairing mode);
3) Activate your mobile phone’s Bluetooth function and set your mobile phone to search for Bluetooth devices within range, and select “LOTFANCY” from the list of devices shown;
4) According to the indication, enter password or PIN No: “0000”;
5) If prompted by your mobile phone to connect, select “Yes” (This will vary among mobile phone models);
6) After successful connecting, blue LED flashes twice quickly every 5 seconds

Remarks :

1. If no devices can be connected within 5 minutes, the receiver will then turn off automatically in order to save power.
2. After successful pairing, the receiver and the mobile phone will remember each other, they will no need to re-pair next time.
3. Every time the receiver is turned on, it will automatically connect to last connected device. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the receiver with the new device according to steps 1–6 mentioned above.
4. When the reveiver is turned on and doesn’t connect to any devices, press MFB button twice, it will automatically connect to the last connected device.
5. When the receiver and the mobile phone are out of effective range to disconnected, they can connect to each other automatically once going back to effective range.
6. If the Bluetooth version of your mobile phone is V2.1 or above, it will no need to enter PIN No. when the receiver pairs with the mobile phone.

Package Included :

Detail Pictures :

Features